10. Cut out a two inch crescent shape out of each of the leg openings in the front.

**If you are not using a sleeve, make sure that your leg openings are not too large for the heel piece. If they are, you will need so take them in first.


11. If you are using knit pieces, place them on top of the toe pieces from the sweater.


12. Pin the toe piece to the leg opening at the crescent with right sides together.


13. Sew the toe piece to the leg opening. It helps to stretch the leg piece to make sure that it’s getting sewn to the toe piece.


Shows the toe piece sewn to the leg. (Sorry it’s so blurry!)




14. Turn inside out.


15. Pin the heel piece to the legs with right sides together.


16. Sew heel piece to toe/leg opening.