Hoodie From Fall/Winter 2014 Ottobre Women’s Issue
- At September 30, 2014
- By Kelly
- In Patterns, Sewing for Me
10
After making this fantastic test version of hoodie pattern #9, I made a couple adjustments to the sleeves. Then I made it with a Polartec® Wind Pro® fleece. The fleece is a high loft/low velour face. I used the loft side as the inside, which is really soft. It makes up for the fact that this fabric fluffs all over the place when you cut it. The vacuum cleaner and some mailing tape were definitely good helpers for this one.
This is a size 38, with length and a little width added to the sleeves. The pattern is intended to be used with wool jersey, which I suspect might be thinner than the fleece I used. I wanted something warm for the ice rink. I tested it out at hockey practice last weekend and it was sooooo cozy with just a tank top layered underneath.
The embroidery is by Windbell Embroidery and is part of the gradient butterflies series. I didn’t do any thread color changes and used a variegated thread instead. This particular design is almost 5″x5″ and I probably should have used a smaller one. I used a tearaway stabilizer on the bottom and a water soluble on the top. This design stitched out really nicely.
The pattern calls for binding around the hood, which I ignored and instead folded under and coverstitched. I also evened out the front and back pieces so I didn’t put the vent flaps in the sides. I might leave it longer in the back next time. Not sure…
Happy Sewing!
Kelly