User Tag List

Results 1 to 7 of 7

Thread: Tinkle Time Trainer in One Piece

  1. #1
    Join Date
    Sep 2007
    Location
    With a mountain view, Alberta, Canada
    Posts
    7,873
    Downloads
    104
    Uploads
    7

    Tinkle Time Trainer in One Piece

    Some were asking about doing the TTT in one piece.

    Here's a quick demo of what I did, it's super easy, but if you're a visual learner, the pics should help.

    Take pieces #1, 2 and 5. If you want to tape it all together instead of tracing, you'll need to print two (2) of pieces #1 and #5.



    I traced the pieces. I folded #2 in half to find the center line, unfolded it and traced it, marking the center. Then, I lined up #1 below that, in line with the center (pc1 is 1/2 of the back, so you will need to put it to one side of the center line), flip it over and repeat to get the entire back. *** At this point, you can stop if you want to have separate side panels ****

    Or, carry on to cut the enter outer and inner in one piece each.



    Before adding piece #5 to your tracing, fold the edge with the 2 notches over the amount of the SA (I think it's 5/8, but double check the instructions!) Then you can match it up to your tracing of the back pieces.

    That will be your complete pattern for the inner and outer layers. You will cut any soaker/pul layers as instructed in the pattern, as well as the ribbing layers.

    When you're finished, it should look something like this:
    Rochelle - mama to Finn, Ben, Josh & Cate

    To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.

    To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.

  2. #2
    Join Date
    Oct 2007
    Location
    Iowa
    Posts
    1,749
    Downloads
    102
    Uploads
    0

    Re: Tinkle Time Trainer in One Piece

    Great idea!!! I had similar thoughts but hadn't worked it out yet. I think I'll be trying this once I get my new snap pliers.
    Jenn
    Married to D (12/28/01), mama of 3 beautiful girls (7/03, 8/07, and 12/10)

  3. #3
    Join Date
    Jul 2005
    Location
    between full moons
    Posts
    5,077
    Downloads
    5
    Uploads
    0

    Re: Tinkle Time Trainer in One Piece

    gosh - thank you!!! (HUG)
    Kerry
    SAHM to Alexandria (18), Anastasia (15) and Andromeda (5): aka Alex, Ana, and Andi


    To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.


    To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
    (my writing page)
    twitter: @kerryadrienne

  4. #4
    Join Date
    Sep 2009
    Location
    Nashville, TN
    Posts
    635
    Downloads
    10
    Uploads
    0

    Re: Tinkle Time Trainer in One Piece

    Cool instructions. I bought that pattern last week & have enjoyed looking through them. Can't remember her name, the designer - but I had problems downloading the pattern & she emailed me immediately & sent new files. that was very considerate of her & rest assured, I will be watching her site for additional patterns. I bought a SNAP PRESS. I was so excited over that!

    Sam in Middle TN

  5. #5
    Join Date
    Sep 2009
    Location
    Queensland, Australia
    Posts
    749
    Downloads
    42
    Uploads
    0

    Re: Tinkle Time Trainer in One Piece

    Thanks for this. I just bought the pattern and with no serger was looking to try make it one piece.

  6. #6
    Join Date
    Aug 2015
    Posts
    1
    Downloads
    0
    Uploads
    0

    Re: Tinkle Time Trainer in One Piece

    I know this is an older post, but do you have the pattern you made for this? I am just curious if you have a version I can print out, I am not following the piece together and follow :P

  7. #7
    Join Date
    Apr 2006
    Location
    here, usually :)
    Posts
    25,123
    Downloads
    77
    Uploads
    8

    Re: Tinkle Time Trainer in One Piece

    You'd have to piece together your own pattern, we can't distribute the Tinkle Time pattern itself, sorry!

    To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
    ~ kelly ~

    mom to Alex, Zoe and Jack

    my ISO:
    Snoopy Embroidery CDs
    dies for metal snaps to fit an OSDS press & 14/16 metal snaps

    Visit Sewing Mamas'
    To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
    !
    Find Sewing Mamas on
    To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
    !
    Tweet with
    To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
    !
    Check out the Sewing Mamas
    To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
    !

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •