Reversible Pillowcase Dress - in downloads

The post in Material Girls got me thinking about how to do this, and I couldn't get it out of my mind. I had to sew one up to see if my idea would work. It did, and results in a really nice weight pillowcase dress, so I thought I would share it with all of you.

I didn’t use a pattern for this, but if you want one, you can use any of the free ones out there, or the one in an older issue of Ottobre. You will want to adjust the top part so that there is only a seam allowance there rather than enough to fold over to make your casing.

Cut 2 fronts and 2 backs (a front and a back from each fabric). Seriously, you can wing the shape. It should look like these.

http://i248.photobucket.com/albums/g...20100713_1.jpg

Now, take your two fronts and place them right sides together. Sew around the top from armhole to armhole leaving an opening near the top of each armhole opening. Your opening should be slightly wider than the width of the ribbon you want to use. Be sure to backstitch at each end of your stitching.

http://i248.photobucket.com/albums/g...100713_3-1.jpg

Trim corners and clip curves.

http://i248.photobucket.com/albums/g...20100713_4.jpg

Turn right side out and press. Be sure that the seam allowance in your openings is folded under. (you may want to take some small pieces of fusible web and use it to secure the SA to the fabric here. Just be sure not to fuse your opening closed!)

http://i248.photobucket.com/albums/g...20100713_5.jpg

Repeat with your two back pieces.

Now open out your front pieces so that the side seams form a straight line on either side of the bodice piece.

http://i248.photobucket.com/albums/g...20100713_6.jpg

Open out the back pieces and lay it right sides together with the front pieces, matching up the side seams--be careful to match the seam at the underarms.

http://i248.photobucket.com/albums/g...20100713_7.jpg

Sew your side seams from the bottom of one side of your dress to the bottom of the other side of your dress. Repeat for the other side.

http://i248.photobucket.com/albums/g...20100713_8.jpg

Open the dress out so that the “inside of the dress is to the inside and the “outside” is to the outside. Fold up and press your hem allowance on both dress fabrics.

http://i248.photobucket.com/albums/g...20100713_9.jpg

The bottom should be even with the hems to the inside.

http://i248.photobucket.com/albums/g...0100713_10.jpg

You can hem each dress fabric separately, but if you do, you will need to finish your seam allowances before you do. I hemmed them together by topstitching.

http://i248.photobucket.com/albums/g...0100713_11.jpg

Now, sew two parallel lines on either edge of the opening you left on the front of the dress at the beginning. This will make your casings. Repeat for the back.

http://i248.photobucket.com/albums/g...0100713_12.jpg

Thread your ribbon through your casings and tie a bow, or use two ribbons and tie a bow at each shoulder. Voila!

http://i248.photobucket.com/albums/g...0100713_15.jpg
http://i248.photobucket.com/albums/g...0100713_14.jpg

CuTE!!!

So cute ~ I will give it a try. I am a beginner but I am learning quick. Love this site!!

Very cool, I just may give that a try. Thanks!

This is great information! Thanks so much!

Thanks for posting that. I may have to make a couple of those for my girls.

you are awesome. thanks for the tute.

that's for that, I'll try it. And good to see your ironing board looks like mine

Thanks for sharing! Cute!

cute! thanks for sharing!