Slipcover Sew-along. . .Part 5

Today, we’re going to put together the pieces we created yesterday for the seat cushion.

If you are using piping, baste your piping around the edges on the right side of one of the surface area pieces. Do the same for the other piece.

http://i248.photobucket.com/albums/g...s/IMG_1990.jpg

Overlap the ends of your piping and let them go off the edge.

http://i248.photobucket.com/albums/g...s/IMG_1991.jpg

Pin your side strip in place with the zipper in the back.

http://i248.photobucket.com/albums/g...s/IMG_1992.jpg

I start sewing here going in the direction I’m pointing. (I will show you why in a minute.)

http://i248.photobucket.com/albums/g...s/IMG_1993.jpg

It will look like this once sewn in place.

http://i248.photobucket.com/albums/g...s/IMG_1994.jpg

Here’s what always happens to me and why I started where I did. I have a little extra. I am completely comfortable with just folding it over and keeping on keeping on. When the cushion is on your chair, you can’t see it because of where it is placed!

http://i248.photobucket.com/albums/g...s/IMG_1995.jpg

Unzip your zipper slightly and sew the other side of your strip to your other surface piece.

http://i248.photobucket.com/albums/g...s/IMG_1997.jpg

Finish unzipping your zipper and turn your cushion cover right side out. Stuff your cushion into it.

http://i248.photobucket.com/albums/g...s/IMG_1998.jpg

Here’s the flaw where I folded it over.

http://i248.photobucket.com/albums/g...s/IMG_1999.jpg

Your finished slipcover! (Note to self: You should iron it before you take pictures.)

http://i248.photobucket.com/albums/g...s/IMG_2000.jpg

Post pictures when you are done! I’m dying to see it 

You did a beautiful job! Thanks for taking the time to do this!! :)

Yay! I am so doing this. Hopefully, this weekend will be quiet and I can get started.:)

oh wow...you did get the slipcover to fit tight over the seat cushion. I think having the seat cushions being tight make all the difference in the world.

Thank you so much for doing this for us. I am still hung up a bit on adding the cording & getting it all straight and perfect, but I'll keep on working with it.

Finished my cushions today!

Along with this great tutorial I'm also using a book I got at Joann's. In the book she gives a formula for the band so you don't have extra fabric. Here's what the book says:

For the zipper panel, measure the length of the cushion's existing zipper, from pull to stopper. Add 2". This is the panel cut length. Add 2" to the cushion depth. This is the panel cut depth. Cut one panel in these dimensions.

For the remaining box band panel, measure the remaining cushion perimeter from the zipper pull, around the cushion side, front, and sides edges to the zipper stop; add 5" to this measurement. The resulting figure is the panel cut length. Add 1" to the cushion depth; this is the panel cut depth. Cut one panel in these dimensions.

Also note, with these instructions you create a 1" deep pocket around the zipper on both ends. And seam allowance is 1/2". I used this formula and my band went on perfectly without a single fold or pucker!

Quote:

---

Originally Posted by ImaT

Finished my cushions today!

Along with this great tutorial I'm also using a book I got at Joann's. In the book she gives a formula for the band so you don't have extra fabric. Here's what the book says:

For the zipper panel, measure the length of the cushion's existing zipper, from pull to stopper. Add 2". This is the panel cut length. Add 2" to the cushion depth. This is the panel cut depth. Cut one panel in these dimensions.

For the remaining box band panel, measure the remaining cushion perimeter from the zipper pull, around the cushion side, front, and sides edges to the zipper stop; add 5" to this measurement. The resulting figure is the panel cut length. Add 1" to the cushion depth; this is the panel cut depth. Cut one panel in these dimensions.

Also note, with these instructions you create a 1" deep pocket around the zipper on both ends. And seam allowance is 1/2". I used this formula and my band went on perfectly without a single fold or pucker!

---

Which book did you get? I have a few I borrowed from the library, but am still wanting a couple more. More info, the better. Thanks.

I'm loosely using this one: Amazon.com: Custom Slipcovers Made Easy: Weekend...
It was great for the cushions but I've kind of abandoned it for the slip.

I finished last night and put the SNS in the runway this afternoon! Thank you so much, Sandra, for doing the sewalong.