Hanna Unders Sew-Along (image heavy)

Okay, I whipped up a pair of unders and took pics. I wanted to try out the seam-out variety, for comfort (no seams on inside). I didn't use my coverstitcher because I didn't feel like re-threading it. :doh

Step 1: Cut out pieces.
http://img.photobucket.com/albums/v3...unders/cut.jpg

Step 2: Sew Crotch pieces to front: Put the two crotch pieces RST, with front pattern piece facing up sandwiched in between.
http://img.photobucket.com/albums/v3...rs/crotch1.jpg

Step 3: Put Back Pattern peice RST with front crotch piece. Bring inside crotch piece underneath the rest of the panties so that it fits with the other pattern pieces. You'll have the crotch pieces RST with the back pattern piece sandwiched in between WRONG side facing up.
http://img.photobucket.com/albums/v3...rs/crotch2.jpg

Panties before turning crotch.
http://img.photobucket.com/albums/v3...rs/crotch3.jpg

Panties after turning crotch:
http://img.photobucket.com/albums/v3...rs/crotch4.jpg

Step 4: Stitch leg binding onto leg holes RST. I forgot to take pics of the rest of this step. Basically you just bind the leg hole. Do this however you normally do it. Usually I use the coverstitcher to stitch the binding on, but today I just used the stretch stitch on my machine.
http://img.photobucket.com/albums/v3...rs/binding.jpg

Step 5: Sew/Serge side seams WRONG sides together. (If you're not concerned about having the side seams on the inside then just stitch RST and continue on to the elastic step.)
http://img.photobucket.com/albums/v3...s/binding2.jpg

More in next post...

Step 6: Topstitch serging to tack down. My serger wasn't cooperating today, so my serging is wonky.
http://img.photobucket.com/albums/v3...s/binding3.jpg

Step 7: But elastic ends together and zig zag (or use your machine's darning stitch) to close into a circle.
http://img.photobucket.com/albums/v3...rs/elastic.jpg

Step 8: Mark 1/4's and pin elastic to panties' waistband raw edge.
http://img.photobucket.com/albums/v3...s/elastic2.jpg

Step 9: Secure elastic onto waist with serger. I usually let the fabric hang over a tad so that the serger has something to cut off -- makes a neater edge IMO.
http://img.photobucket.com/albums/v3...s/elastic3.jpg

Step 10: Turn elastic to inside and stitch. Again, I usually use my coverstitcher here.
http://img.photobucket.com/albums/v3...s/elastic4.jpg

All done!

Front:
http://img.photobucket.com/albums/v3.../donefront.jpg

Back:
http://img.photobucket.com/albums/v3...s/doneback.jpg

:urock

I had wondered about the binding the leg openings instead of using elastic. I just hate that picot edge elastic. I mean, it's kinda pretty, but it's such a PITA to apply, IMO anyway.

Great sew-along! Thank you!!

Looks good. I just made a pair like this as a copycat of yours. Now I can see I didn't do it your way. Off to make another pair. How many panties can one little girl have? :hi:

Those are great, Meagan.......I just love stripes. Hey, about how wide are your binding strips?? I won't be using my serger. For the elastic on the top....I can just make a regular casing or zig zag the edge and turn, right?? That waist elastic doesn't look stretched out at all....can you elaborate. I gotta ask a million questions before I start...so be prepared :sewin

THANKS a bunch!!!

Lisa

i love how those look :yes: i am not sure i am getting the crotch part, but i *think* if i try it IRL i will figure it out.

Quote:

---

Originally Posted by lasagefemme

Those are great, Meagan.......I just love stripes. Hey, about how wide are your binding strips?? I won't be using my serger. For the elastic on the top....I can just make a regular casing or zig zag the edge and turn, right?? That waist elastic doesn't look stretched out at all....can you elaborate. I gotta ask a million questions before I start...so be prepared :sewin

---

The pattern is very trim fitting, which is one reason I really like it. This pattern fits Sophie perfectly in the waist, so no it's not a gathered type waistline. You don't need elastic in the legs like most patterns call for, because they're cut to fit (you can stretch the binding piece as you sew to make the legs a bit tighter). The binding strip is 1.5" wide, but you could make it wider if you want to turn the raw edge under on the inside; I don't because I usually use the coverstitcher. I think I wrote on the pattern that if you don't intend to serge/coverstitch the elastic you can add 1/4" to the waistline and then make a regular casing.

HTH!

Quote:

---

Originally Posted by heather4285

i love how those look :yes: i am not sure i am getting the crotch part, but i *think* if i try it IRL i will figure it out.

---

The crotch part is the hardest to understand and explain. If you need to, sit at the puter with your pattern peices and read the instructions as you sew. Once you get it, you'll understand. (Obviously LOL).

Yup, now I remember you did write that on the pattern. Thanks so much for all your advice :) Can't wait to show you how these turn out for me.

Lisa

Awesome! Thanks so much for doing that! I can't wait to get my tracing! :-)

You're my hero!! [smilie=z (51).gif] I've been wanting to try these for a while. Yippee!!

Ooooo I must have missed this -- can you tuck a tracing into the package for the little girls?

Thanks so much! We need to add this to our downloads :yes:

sure meg. 3T or 4T?

That's awesome! I love that fabric. I've had it for ages and need to do something with it LOL!

Thanks so much for taking all those pictures. I had attempted Hanna underwear a couple times but for some reason I thought there was elastic in the legs and they always came out too tight. I think I'll try another pair, this time without the leg elastic.

Thank-you for doing this Meagan. I think I'm going to try it. I might make some in my size, they look comfy :allisonundies

Thanks for showing pictures step by step on how to make the "unders" Did you just trace a pair of Hanna underwear? or did you make your own?? I don't have Hanna here so do you think these would work using the Ottobre pattern(I forget which issue it is in) :chinscratch

Quote:

---

Originally Posted by PixiesMama

sure meg. 3T or 4T?

---

Both if it's not too much trouble. Mary is a 4T and Melissa (who is going on the potty!!!) is a 3T

Thanks :hug

This is awesome! Katie wears Hannas exclusively, size M. Now did you just trace them? I'd love to make her some as hers wear out, and when she needs the next size, rather than asking my mom to fork out the dough for the Hannas. Plus, such possibilities for colors and patterns!

Is that PRR bright stripes? I have a ton of that just waiting to be cut into...yes I like my stash to age nicely. :/

Yes, I pretty much just traced them. :yes: The first pair came out a little small so I added some to the SA. Honestly, they're still smaller in size than the original pair that I traced (which I think is the size Small). I also cut down the rise quite a bit, because IMO the rise on the Hanna Unders are quite large.

I've never used the Otto under pattern, so I can't be sure. If you wanted to construct them just like this, I'm not sure if another pattern would work, but you could always try it. The reason I like this pattern so much is because the leg holes don't require elastic. I'm not sure how big the leg holes are on the Otto pattern and if they would sag if you didn't use elastic. KWIM?

That PRR is Reds Allover Stripe.

:hi:

Thaznk you for the reply Meagan.... :chinscratch gives me something to think about and consult with my MIL on. She's my sewing advisor :lol

bumping because I'm making some with the ks pattern :heart: :yes: