Binding in the round with coverstitch binder
I used to think that my two options were to bind in the round without using my binder attachment or binding in the flat with the bulky seam at the shoulder. I've been working this out in my head for awhile, and I finally figured out how to do it, so I thought I would share.
This was difficult to explain, so if any of this isn't clear, let me know.
First, begin binding (using your coverstitch and binder attachment) at the back and continue around, stopping an inch or two short of where you began.
http://i248.photobucket.com/albums/g...s/P1010057.jpg
Now, get out your seam ripper and rip your stitches until you have two free tails of binding and the beginning and end are even with the fabric (not going off the edge).
http://i248.photobucket.com/albums/g...s/P1010058.jpg
Place the edges of your binding along the unbound part that you left and mark where they overlap. (I used pins.)
http://i248.photobucket.com/albums/g...s/P1010060.jpg
Open the binding and place it right sides together, being sure not to get it twisted. Sew along the line you marked.
http://i248.photobucket.com/albums/g...s/P1010061.jpg
Trim the excess binding http://i248.photobucket.com/albums/g...s/P1010062.jpg
Finger press the seam allowances on the binding open.
http://i248.photobucket.com/albums/g...s/P1010063.jpg
Go to the iron and iron your binding folds back in place. (I used small pieces of steam a seam to secure it in place.)
http://i248.photobucket.com/albums/g...s/P1010064.jpg
Go back to your coverstitch machine and stitch in place, overlapping both ends. . .maybe you will do a better job than I did of lining up your stitches ;)
http://i248.photobucket.com/albums/g...s/P1010065.jpg
Re: Binding in the round with coverstitch binder
Re: Binding in the round with coverstitch binder
Interesting....I'm going to have to give that a whirl soon!
Re: Binding in the round with coverstitch binder
Re: Binding in the round with coverstitch binder
Thanks! That looks awesome!
I bet you could make the seam less bulky if you sew it on the diagonal. Although you would probably have to rip more to get the freedom to do that. That might not be worth it!
Re: Binding in the round with coverstitch binder
Very nice!
I don't have a coverstitch machine, but I'll try it with the twin needle :D
Re: Binding in the round with coverstitch binder
I see on here you started with it already attached.
Is there a tute showing how to use the binder attachment for the CS machine? I could use that.
Re: Binding in the round with coverstitch binder
Thanks for this!
Quote:
Originally Posted by
chrysalis
I see on here you started with it already attached.
Is there a tute showing how to use the binder attachment for the CS machine? I could use that.
There's a fantastic one by cobblestone. http://www.sewingmamas.com/b/showthr...er+coverstitch
Re: Binding in the round with coverstitch binder