Slipcover Sew-along. . .Part 5
Today, we’re going to put together the pieces we created yesterday for the seat cushion.
If you are using piping, baste your piping around the edges on the right side of one of the surface area pieces. Do the same for the other piece.
http://i248.photobucket.com/albums/g...s/IMG_1990.jpg
Overlap the ends of your piping and let them go off the edge.
http://i248.photobucket.com/albums/g...s/IMG_1991.jpg
Pin your side strip in place with the zipper in the back.
http://i248.photobucket.com/albums/g...s/IMG_1992.jpg
I start sewing here going in the direction I’m pointing. (I will show you why in a minute.)
http://i248.photobucket.com/albums/g...s/IMG_1993.jpg
It will look like this once sewn in place.
http://i248.photobucket.com/albums/g...s/IMG_1994.jpg
Here’s what always happens to me and why I started where I did. I have a little extra. I am completely comfortable with just folding it over and keeping on keeping on. When the cushion is on your chair, you can’t see it because of where it is placed!
http://i248.photobucket.com/albums/g...s/IMG_1995.jpg
Unzip your zipper slightly and sew the other side of your strip to your other surface piece.
http://i248.photobucket.com/albums/g...s/IMG_1997.jpg
Finish unzipping your zipper and turn your cushion cover right side out. Stuff your cushion into it.
http://i248.photobucket.com/albums/g...s/IMG_1998.jpg
Here’s the flaw where I folded it over.
http://i248.photobucket.com/albums/g...s/IMG_1999.jpg
Your finished slipcover! (Note to self: You should iron it before you take pictures.)
http://i248.photobucket.com/albums/g...s/IMG_2000.jpg
Post pictures when you are done! I’m dying to see it
Re: Slipcover Sew-along. . .Part 5
You did a beautiful job! Thanks for taking the time to do this!! :)
Re: Slipcover Sew-along. . .Part 5
Yay! I am so doing this. Hopefully, this weekend will be quiet and I can get started.:)
Re: Slipcover Sew-along. . .Part 5
oh wow...you did get the slipcover to fit tight over the seat cushion. I think having the seat cushions being tight make all the difference in the world.
Thank you so much for doing this for us. I am still hung up a bit on adding the cording & getting it all straight and perfect, but I'll keep on working with it.
Re: Slipcover Sew-along. . .Part 5
Finished my cushions today!
Along with this great tutorial I'm also using a book I got at Joann's. In the book she gives a formula for the band so you don't have extra fabric. Here's what the book says:
For the zipper panel, measure the length of the cushion's existing zipper, from pull to stopper. Add 2". This is the panel cut length. Add 2" to the cushion depth. This is the panel cut depth. Cut one panel in these dimensions.
For the remaining box band panel, measure the remaining cushion perimeter from the zipper pull, around the cushion side, front, and sides edges to the zipper stop; add 5" to this measurement. The resulting figure is the panel cut length. Add 1" to the cushion depth; this is the panel cut depth. Cut one panel in these dimensions.
Also note, with these instructions you create a 1" deep pocket around the zipper on both ends. And seam allowance is 1/2". I used this formula and my band went on perfectly without a single fold or pucker!
Re: Slipcover Sew-along. . .Part 5
Quote:
Originally Posted by
ImaT
Finished my cushions today!
Along with this great tutorial I'm also using a book I got at Joann's. In the book she gives a formula for the band so you don't have extra fabric. Here's what the book says:
For the zipper panel, measure the length of the cushion's existing zipper, from pull to stopper. Add 2". This is the panel cut length. Add 2" to the cushion depth. This is the panel cut depth. Cut one panel in these dimensions.
For the remaining box band panel, measure the remaining cushion perimeter from the zipper pull, around the cushion side, front, and sides edges to the zipper stop; add 5" to this measurement. The resulting figure is the panel cut length. Add 1" to the cushion depth; this is the panel cut depth. Cut one panel in these dimensions.
Also note, with these instructions you create a 1" deep pocket around the zipper on both ends. And seam allowance is 1/2". I used this formula and my band went on perfectly without a single fold or pucker!
Which book did you get? I have a few I borrowed from the library, but am still wanting a couple more. More info, the better. Thanks.
Re: Slipcover Sew-along. . .Part 5
I'm loosely using this one: Amazon.com: Custom Slipcovers Made Easy: Weekend...
It was great for the cushions but I've kind of abandoned it for the slip.
Re: Slipcover Sew-along. . .Part 5
I finished last night and put the SNS in the runway this afternoon! Thank you so much, Sandra, for doing the sewalong.