PDA

View Full Version : [notions] Rick Rack & Bias Trimmed using Binder Attachment



April1930s
08-02-2008, 01:45 PM
Some of you may have seen the little jammies I made for my SweetPea. I trimmed the neckline, sleeve cuff and hem of the top.

I used single fold bias tape in the attachment, and slipped it through the last wide slot - I used a stiletto (looks like a mini ice pick) to help feed it all the way through the binder before beginning, but a pin or needle would work fine. Once you get the binding all the way through the attachment and beyond the needle, insert the fabric into the left-side guide. Then place your rick rack on top of that and sloooooowly begin. Always practice first on a long strip of fabric.

http://farm4.static.flickr. com/3251/2724217932_34962bf1d 7.jpg

You can slide the guide left or right (the hole where the needle goes through) to place the stitching in the right place along the bias so it catches the underside, too.

http://farm4.static.flickr. com/3180/2724217854_65db0c916 e.jpg

http://farm4.static.flickr. com/3277/2724218110_b86f61e06 a.jpg

http://farm4.static.flickr. com/3282/2723395943_82043fe80 5.jpg

Curves can be accomplished too!

http://farm4.static.flickr. com/3150/2724218194_d5352c279 f.jpg
[/URL]Just remember to practice and go slooooooooow. :yes:


http://farm4.static.flickr. com/3053/2723125333_a85350ed1 9.jpg

http://farm4.static.flickr. com/3174/2723952966_6c80b57ed 0.jpg
Because this rick rack was a bit narrower, I let it just catch the edge of the swells. This gave it a lacier look.

Enjoy!
[URL="http://farm4.static.flickr. com/3174/2723952966_6c80b57ed 0.jpg"] (http://farm4.static.flickr. com/3251/2724217932_a16f830e2 c_o.jpg)

kmccloud
08-02-2008, 02:40 PM
Oh this is just too cool!! Is this on a coverstitch machine or is there a binding attachment for a regular sewing machine? (sorry if this is a dumb question).

April1930s
08-02-2008, 02:53 PM
This was all on my old Singer Featherweight 222 (aka 221, but with a free-arm). All old Singers came with a basic set of attachments, which most can be used on any low vertical shank sewing machines.

just peachy
08-02-2008, 06:03 PM
April...fantastic tutorial!! I just knew that was a Featherweight. I love this technique. :)

patpourri
08-04-2008, 01:01 PM
Thank you, April. Great instructions and pictures. Your final product looks perfect!

l3designs
08-04-2008, 07:59 PM
Beautiful technique. Thanks for the instructions.

Cathi
08-04-2008, 08:29 PM
Thank you for posting this! I've ordered a binding attachment and was wondering if I could use premade stuff in it, this is just what I needed. Looks lovely.

April1930s
08-04-2008, 09:03 PM
Yes you can use pre-made... that's what is in my binder! (Single-fold)

dyscodev
10-24-2008, 06:06 PM
I have a binder attatchment that came with my 401A, I've been wanting to try this thank you!!

Kathy_818
10-25-2008, 11:47 AM
That looks slick! I"m impressed.

I have an old Featherweight that was my grandmother's -- did you say that's an attachment that came with the machine? I'll have to pull it out and see if I have that foot!

Thanks!

Cathi
10-25-2008, 05:45 PM
Thank you so much!! I have been wondering whether I can use the binding attachment for bias tape.

Would you like to try FOE with your binding attachment next? I did try this...no success yet though.

You're just using a chainstitch, is that right?

plainjanesews
10-25-2008, 06:18 PM
april- you are amazing. how do you have the time to make all those darling things for your girls and make us a tutorial!

Nylaskye
12-02-2008, 04:49 PM
Omigod, I'm in love! I ordered a bias binding foot a month ago but haven't had time to use it yet. I had no idea I could use ric-rac in it! Thanks!

branandmike
12-02-2008, 10:28 PM
WOW! I always wondered what bias tape was and what you used it for!