PDA

View Full Version : Button band shirt 1/2011 placket tutorial



limegreenvw
02-07-2012, 11:17 PM
First cut out the shirt front, placket and placket interfacing.
http://i817.photobucket.com/albums/zz99/limegreenvw/6c660f13.jpg
Apply interfacing to the wrong side of the placket.

Next, cut a small square of interfacing and attach to the very button of the placket opening in the shirt. Do this on the wrong side of the shirt front. This is not in the pattern directions, but I felt it made that area just a bit more stable and I was happy with the end result.
http://i817.photobucket.com/albums/zz99/limegreenvw/78b795bd.jpg
Okay...now you have the interfacing on both pieces....
http://i817.photobucket.com/albums/zz99/limegreenvw/7b966958.jpg
Sew gathering stitches along both sides of the placket opening. I like to sew 2 rows.
http://i817.photobucket.com/albums/zz99/limegreenvw/dfe527a9.jpg
Adjust gathers to fit placket piece. Now here is where I did something different. I cut a diagonal slit at the bottom of the placket opening before sewing the placket. The cut I made was the same width as the seam allowance I was sewing with. Approx. 3/8.
http://i817.photobucket.com/albums/zz99/limegreenvw/ddd701bb.jpg
I'm going to pin....right sides together...one side of the placket to one side of the shirt. I will sew from the top of the placket opening and STOP when I get to the diagonal cut.
All pinned and ready to sew....
http://i817.photobucket.com/albums/zz99/limegreenvw/528dd203.jpg
See a close-up of the cut. This is where you will stop sewing on both long sides of the placket. Sorry for some reason I didn't get a picture of the actual sewing along both sides of the placket.
http://i817.photobucket.com/albums/zz99/limegreenvw/5e8c778d.jpg
After both long sides are sewn, pinch the short side--bottom edge of the placket together.
http://i817.photobucket.com/albums/zz99/limegreenvw/1eea7069.jpg
You will sew along that edge.
http://i817.photobucket.com/albums/zz99/limegreenvw/290ae972.jpg
This is what the back will look like.

Finish the edges with a serger or sewing machine set on a zig-zag stitch.
http://i817.photobucket.com/albums/zz99/limegreenvw/fd85d5b3.jpg
Take your shirt front to the ironing board and press the placket. Iron the side seams and the bottom short seam of the placket all in.

After pressing, carefully topstich along all three sides of the placket.
http://i817.photobucket.com/albums/zz99/limegreenvw/56a6a364.jpg
Your competed placket.
http://i817.photobucket.com/albums/zz99/limegreenvw/7d97b17d.jpg
This is just what worked for me and I thought I'd share and maybe help someone out.....:)

fabriclovinfool
02-08-2012, 01:16 AM
Great tut...makes me want to try this top again:yes:

judiesews
06-22-2016, 05:32 PM
I just got this issue and this will really help when I make this top. Thank you!

limegreenvw
06-30-2016, 08:35 PM
You're welcome! Enjoy sewing!! :)

ElioraImmanuel
11-01-2016, 09:27 AM
I am impressed...your abilities make my head spin!

marianaro
01-16-2017, 01:09 AM
I really want to try this out. Hopefully it's not too difficult for a beginner.

Snowell
04-18-2017, 04:37 AM
Nice tutorial. I'll be sure to try this out!