PDA

View Full Version : Picot Edging with a Serger on Chiffon Fabric DL



cinnamama
02-28-2011, 11:00 PM
I played around with my serger settings after a recent post here about serging chiffon. When finishing the edges of polyester chiffon I found the picot edge stitch works the best. Poly chiffon can be difficult to work with and frays easily.

I followed the serger settings in my manual. My serger is a 4 thread Magnolia 7034D. The settings are similar to the rolled hem setting.

Stitch Length 3.5
Differential 1.0
Needle Plate Setting Knob R (rolled hem)
Needle tensions 4
Upper Looper tension 3
Lower Looper tension 7

http://farm5.static.flickr. com/4106/5487370877_e7e0bae64 b.jpg

I use woolly nylon in the upper looper. In the following photos I had white thread in the needles and the lower looper and light blue woolly nylon in the upper looper.

As you serge, make sure to pull the fabric from the back or it will gather slightly. (My serger needs a good dusting - it is the last day of the SG!)

http://farm6.static.flickr. com/5012/5487954298_9617c523e a.jpg

I tried to remove the left needle as my manual suggested and this was the result, a very nice stitch. But I found this stitch much more likely to pull away from the fabric. This stitch is much easier when serging straight lines.

http://farm6.static.flickr. com/5297/5487955032_9dfc5f304 d.jpg

This is the result of leaving the left needle in - a wider stitch but more stable.

http://farm6.static.flickr. com/5096/5487973618_e2b6d6056 7.jpg

davi23
02-28-2011, 11:08 PM
Wow! What a beautiful finish. Thank u!

northernmama
03-01-2011, 01:59 PM
that is awesome, TFS!

Bobolots
03-01-2011, 03:08 PM
that's cool! thanks for taking the time to do it.